宝钢日铁汽车板有限公司C(略)机组表面缺陷检测仪招标公告
发布日期:(略)
招标编号:(略)
招标编号(国际招标网):(略)
上海宝华国际招标有限公司(以下称招标机构)受欧冶工业品股份有限公司(以下称买方)委托,就其宝钢日铁汽车板有限公司C(略)机组表面缺陷检测仪所需的下列货物进行公开招标,邀请合格投标人进行网上电子投标。
标段编号:(略)
标段名称:(略)
1.招标货物名称、数量、技术规格和资金来源:(略)
招标货物名称:(略)
数量:(略)
技术规格:(略)
(1)选型设计:(略)
(2)相机的功能要求:(略)
(3)扫描宽度范围:(略)
(4)标配精整线动态回放系统7套,表检仪在C(略)~C(略)、C(略)共7条精整机组返修时,应具备动态回放功能、实时位置跟踪功能。
(5)综合缺陷检出率≥(略)%;综合分类准确率;≥(略)%;过检率≤5%;周期性缺陷识别率≥(略)%;设备运行率≥(略).8%。
(6)其它技术参数详见招标技术文件。
资金来源:(略)
2. 交货地点和交货时间:(略)
交货地点:(略)
交货时间:(略)
3.*凡确认投标的投标人请登录中国国际招标网平台(http:(略)
宝华智慧招标共享平台(https:(略)
4. 购买招标文件时间:(略)
5. 招标平台使用费:(略)
1,(略).(略)元人民币或(略).(略)美元整。
招标文件均按标段进行计价出售,投标人成功购标后,自行下载招标文件和投标文件模板。招标文件一经售出不得退还。
6. 投标截止时间和开标时间:(略)
7. 开标方式:(略)
8. 开标地点:(略)
9. *对投标人的资格要求:(略)
(1)合同签订日期自(略)年1月1日至投标截止日,所投设备的制造商应具有冷轧机组同等配置(线扫描3检测通道及以上,不含孔洞检测通道)表检仪的供货业绩累计数量不少于2套(其中含已通过正式验收业绩不少于1套)。
(2)投标方如为表检仪设备代理商,应具有所投表检仪设备制造商的有效授权。
(3)未被国家企业信用信息公示系统(www.gsxt.gov.cn)列入严重违法失信企业名单(如适用)。
(4)未被“信用中国”网站(www.creditchina.gov.cn)列入失信被执行人名单(如适用)。
(略). 本项目不接受联合体投标。
(略).招标人相关信息:(略)
招标人联系人:(略)
招标人邮箱:(略)
招标人电话:(略)
(略). 未领购招标文件的不得参加投标。
(略). 客服热线:(略)
传
真:(略)
网上购标方法:(略)
项目经理:(略)
电
话:(略)
电子邮件:(略)
业务咨询:(略)
招标机构地址:(略)
购标时人民币付款采用第三方支付,外币付款可以汇款到相应外币账户内
开户银行(外币):(略)
收 款
人:(略)
账 号:(略)
美元:(略)
Swift
Code:(略)
Surface Defect Detector for Unit C(略) of Baosteel NSC Arcelor Automotive Steel Sheet Co., Ltd
Issue
Date:(略)
Tendering
No:(略)
Tendering No. (China International Bidding Website):(略)
Shanghai Baohua International Tendering Co., Ltd.(Hereinafter
referred to as Tendering Agency) is commissioned by Baosteel NSC Arcelor Automotive Steel Sheet Co., Ltd(Hereinafter
referred to as tenderer) on Open Tendering for the following goods
required in Surface Defect Detector for Unit C(略) of Baosteel NSC Arcelor Automotive Steel Sheet Co., Ltdinvites
eligible bidders to online e-bidding.
Bid section
No:(略)
Bid section
Name:(略)
1. The name,
quantity, technical specifications and fund sources of goods for
tendering:(略)
The
name:(略)
Quantity:(略)
Technical
specifications:(略)
(1)Type selection design:(略)
(2)The functional requirements of the camera:(略)
(3)Scanning width range:(略)
(4)Finishing lines are equipped with seven sets of dynamic playback systems as standard. The surface inspector should have functions of dynamic playback and real-time position tracking when repairing seven finishing lines, including C(略)~C(略) and C(略).
(5)Comprehensive defect detection rate≥(略)%;Comprehensive classification accuracy≥(略)%;Over-detection rate ≤5%;Periodic defects identification rate≥(略)%;Availability≥(略).8%.
(6)Refer to the bidding technical documents for other requirements.
Fund
sources of goods:(略)
2. Delivery
time and place:(略)
Delivery
time:(略)
Delivery
place:(略)
3. *The
bidders who have confirmed to participate the bid must log on China
International Bidding Website (http:(略)
Baohua
E-bidding website (http:(略)
4. Time for
purchasing Tendering documents:(略)
5. Sales
prices of the tendering document:(略)
All
tendering documents will be sold per bid package (or section).
After purchasing the bid, the bidder can download the tendering
document and the template of bidding document. The tendering
documents sales are non-refundable.
6. Deadline
for bid submission and Bid Opening Time:(略)
7. Bid
opening method :(略)
8. E-bid
opening place:(略)
9. *Requirements
of Bidder’s qualification:(略)
(1)From the date of contract signing on January 1, (略) to the deadline of bidding, the manufacturer of the bidding equipment shall have at least 2 reference plants (including no less than 1 set that has been official acceptance) as the same configuration as cold rolling line (line scanning 3 detection channels and above, excluding hole detection channels).
(2)If the tenderer is the agent of the instrument, it shall have the valid authorization of the manufacturer.
(3)Not included in the list of enterprises with serious illegal and dishonest acts in National Enterprise Credit Information Publicity System (www.gsxt.gov.cn) (if applicable).
(4)Not included in the credit rating blacklist in Credit China (www.creditchina.gov.cn)(if applicable).
(略). This
project consortium bidding is not accepted
(略).Information about the tenderer:(略)
Tenderer contact:(略)
Tenderer's mailbox:(略)
Tenderer telephone:(略)
(略). Tel:(略)
Fax:(略)
Online
tendering document purchase:(略)
Bid
manager:(略)
Tel:(略)
E-mail:(略)
Bussiness Consulting Tel:(略)
Bid
agency address:(略)
When purchasing the tendering document, the payment in RMB shall be made by the third party, and the payment in foreign currency can be remitted to the corresponding foreign currency account.
Bank
account:(略)
Beneficiary:(略)
Account
Number
USD:(略)
Swift
Code:(略)